This page displays a live archive of stratospheric monitoring products for the Northern Hemisphere,
built from the ERA5 reanalysis dataset and the forecast of one of four models: GFS, GEFS (NOAA's ensemble mean),
ECMWF (IFS) or AIFS (ECMWF's data-driven model, two times per day), or their Multi-model mean. All updated four times per day bar ECMWF.
The products (GPH Anomaly, U60 Zonal Wind and its Anomaly, Polar Cap Temperature, Wave1/2 Amplitude
Anomalies, and Eddy Heat Flux Anomaly) together describe the full chain of stratospheric
variability, from the initial thermal signal through to the dynamical response most
relevant for extended-range surface weather forecasting.
How to use this page
- Model: choose the forecast that is laid over the ERA5 history: GFS, GEFS, ECMWF, AIFS or the Multi-model mean. Switching model keeps the same run, or the latest earlier one if the new model has none.
- Run: select the date and cycle you want to view (00Z, 06Z, 12Z or 18Z for every model except ECMWF, which has 00Z and 12Z). Only complete runs are listed. Use the ‹‹ ›› arrows to step through runs one at a time.
- Product: select one of the available diagnostics.
- View: switch between the Last 60 days and Full period plots.
- Animate runs / Animate models (above the chart, on the right): opens, in a new tab, a GIF of the selected model, product and view through all available runs (oldest to newest), or of the selected run and product for every model that has exactly that run. The GIF is built when you click, so the tab stays blank for a while. Right-click it to save it.
- Right-click any image and choose Open image in new tab to view it at full resolution.
The products
GPH Anomaly - Geopotential Height
Shows the daily polar-cap mean geopotential height (65-90°N, all longitudes), expressed as a
normalised anomaly in standard deviations (σ) relative to the 1991-2020 ERA5 climatology.
Blue shading indicates heights below climatology (stronger, colder polar vortex);
red/orange shading indicates heights above climatology (weaker or displaced vortex).
This is the primary indicator of overall polar vortex strength and is most active during
the October-April stratospheric monitoring season.
U60 Zonal Wind - Wind at 60°N
Shows the daily zonal mean zonal wind at 60°N latitude across all pressure levels.
The last 60 days view additionally overlays anomaly contours in purple;
the full period view shows the absolute wind speed in m/s (westerly = positive, easterly = negative).
A reversal of the 10 hPa wind from westerly to easterly at 60°N is the WMO definition
of a Sudden Stratospheric Warming (SSW). This product is the most direct link between
stratospheric conditions and tropospheric weather impacts over Europe and North America.
U60 Zonal Wind Anomaly - Wind at 60°N
Shows the same daily zonal mean zonal wind at 60°N as the product above, but as its departure from the
1991-2020 ERA5 climatology of the same day of the year, in m/s, instead of the absolute wind.
Blue shading means the wind is weaker than normal for the date (less westerly or more easterly);
red shading means it is stronger than normal (more westerly). Note that the colours follow the sign of the
anomaly: unlike the GPH and temperature products, where blue means a stronger, colder vortex, a blue anomaly
in the upper stratosphere here means a weaker vortex than normal. Because it is measured against the
climatology of the day, it shows at a glance how unusual the wind is, also when the absolute wind is still
westerly but far below what is normal for the time of year.
Polar Cap Temperature - 65-90°N Mean
Shows the daily cos(lat)-weighted area mean temperature over the polar cap (65-90°N),
expressed as a normalised anomaly (σ) relative to the 1991-2020 ERA5 Climatology.
Blue = colder than climatology (strong, cold vortex); red = warmer than climatology
(vortex weakening or SSW). Temperature anomalies in the upper stratosphere (1-10 hPa)
typically lead the wind reversal by several days, making this an early
signal of an impending SSW event.
Wave 1 Amplitude Anomaly
Shows the daily planetary Wave 1 geopotential height amplitude anomaly at 65°N,
expressed as a normalized anomaly (σ) relative to the 1991-2020 ERA5 climatology.
Purple shading indicates below-normal wave activity (suppressed wave forcing);
orange/brown shading indicates above-normal wave activity (enhanced wave forcing,
potential SSW precursor). Wave 1 dominance is associated with vortex displacement events.
Wave 2 Amplitude Anomaly
As above but for planetary Wave 2. Wave 2 dominance is associated with vortex
split events, the more dramatic class of Sudden Stratospheric Warming consequences.
A simultaneous increase in Wave 2 and decrease in Wave 1 can be a precursor to a split SSW.
Eddy Heat Flux Anomaly
Shows the daily meridional eddy heat flux (v'T'), averaged over 40-80°N at each
pressure level, expressed as a normalised anomaly (σ) relative to the 1991-2020
ERA5 climatology. Teal shading indicates below-normal (equatorward, cold-air) flux;
orange/brown shading indicates above-normal (poleward, warm-air) flux, the direct
signature of planetary waves transporting heat into the polar stratosphere. Unlike
the Wave 1/2 amplitude charts, which describe the size of the wave disturbance
itself, eddy heat flux measures the actual heat transport the wave is doing, and is
often the earliest signal in the whole chain, typically leading the polar cap
temperature and GPH response by one to two weeks.
Reading the plots
- Vertical axis: pressure (hPa) on a logarithmic scale, from 1000 hPa
(lower troposphere) to 1 hPa (upper stratosphere, ~45 km). A linear height scale in km
is shown on the right.
- Colour scale: normalised anomalies in σ units. As a general guide:
|σ| < 0.5 is near-normal; |σ| ≈ 1–2 is notable; |σ| ≥ 2 is a strong event. The exception is the
U60 Zonal Wind Anomaly chart, which is in m/s.
- Palettes: GPH and polar cap temperature: blue (below normal) to red (above normal);
U60 anomaly: blue (weaker wind) to red (stronger wind); wave amplitudes: purple (below normal) to orange/brown
(above normal); eddy heat flux: teal (below normal, equatorward) to orange/brown (above normal, poleward).
What each colour means is explained with the product above; the σ thresholds are the same for all σ-based products.
- ERA5 / forecast seam: a dashed vertical line marks the boundary between
ERA5 reanalysis (left, solid shading) and the model data (right, lighter shading): GFS, GEFS, ECMWF, AIFS or the Multi-model mean.
- Past Days and Today line: ERA5 ends a few days behind real time. When the gap is more than one day,
a second dashed line marks the current date. Between the last ERA5 day and that line the chart shows the selected
model's own 1-day forecasts from the previous days' runs (Past Days; for the Multi-model charts, the mean of those of the models in it),
which stand in for the analysis until ERA5 catches up. The forecast itself (Forecast) is to the right of the line.
- Climatology period: 1991-2020 for all products.
The models compared
- Same history: everything left of the dashed seam is identical in all sets, so the models can be compared directly.
- Upper levels: the free ECMWF (IFS and AIFS) and GEFS data have no levels above 10 hPa, so that part of the forecast side is blank on their charts. Between 100 and 10 hPa they provide only the 100, 50 and 10 hPa levels; the 70, 30 and 20 hPa values shown are interpolated (linearly in log-pressure), so fine vertical detail there is smoother than in the GFS charts. On the Multi-model charts that part is GFS alone (see below).
- GEFS is an ensemble mean: it is smoother than a single forecast, so wave amplitudes and heat fluxes computed from it are weaker than those of an individual run, especially at long range. It also has fewer levels than GFS (1000, 925, 850, 700, 500, 250, 200, 100, 50 and 10 hPa): the others, such as 300 or 150 hPa, are interpolated from their neighbours.
- Forecast length: GFS and GEFS run to day 16, ECMWF and AIFS to day 15. The time axes have the same length, so the last day of the ECMWF and AIFS charts is empty. The Multi-model charts end on day 15, the last day with at least three models.
- Cycles: ECMWF is shown for the 00Z and 12Z runs only (the free IFS data covers the full 15 days only at those cycles), so it has no 06Z or 18Z runs. The AIFS has four runs a day, each to day 15.
- Multi-model: the equal-weight mean of the forecasts of the models that have run for that cycle: GFS, GEFS, ECMWF and AIFS at 00Z and 12Z; GFS, GEFS and AIFS at 06Z and 18Z (ECMWF has no such runs). It is drawn once at least three models are available, and the header of each chart names the models in it. GEFS counts once, as the ensemble mean it is. Between 1000 and 10 hPa each level, each day is the mean of the models that have a value there, and is left out where fewer than three do (so a level that GFS lacks, such as 150 hPa, is dropped at 06Z and 18Z and the chart interpolates between its neighbours). Above 10 hPa only GFS has data, so that part is GFS alone, as the header says. The wave amplitudes and heat fluxes are averaged model by model. As an average it is smoother than a single forecast and, where the models disagree, can show a state none of them forecasts; the AIFS starts from the ECMWF analysis, so it and the IFS are not independent. The Multi-model charts are made after the last model of the cycle has finished.
Data sources
- ERA5 reanalysis: Copernicus Climate Change Service (C3S) / ECMWF, accessed via the Climate Data Store (CDS).
Pressure levels 1000-1 hPa, 2.5° grid, 00 UTC daily.
- GFS forecast: NOAA/NCEP Global Forecast System, 1.0° deterministic run,
accessed via NOMADS. Forecast range: +24h to +384h (16 days).
- GEFS forecast: NOAA/NCEP Global Ensemble Forecast System, ensemble mean (0.5°, sampled on a 1.0° grid),
from the NOAA open-data archive. 00Z, 06Z, 12Z and 18Z runs, forecast range +24h to +384h (16 days), pressure levels 1000-10 hPa.
- ECMWF forecast: ECMWF Integrated Forecast System (IFS), high-resolution
deterministic run, from the ECMWF open data service (0.25°, sampled on a 1.0° grid).
00Z and 12Z runs, forecast range +24h to +360h (15 days), pressure levels 1000-10 hPa.
- AIFS forecast: ECMWF's Artificial Intelligence Forecasting System (AIFS Single), a data-driven
deterministic model, from the ECMWF open data service (0.25°, sampled on a 1.0° grid).
00Z, 06Z, 12Z and 18Z runs, forecast range +24h to +360h (15 days), pressure levels 1000-10 hPa.
- Multi-model: computed here from the forecasts above (see The models compared); forecast range +24h to +360h (15 days), pressure levels 1000-1 hPa (above 10 hPa from GFS alone).
Credits
Plots produced by Giuseppe Petricca (hebweather.net).
Data: ERA5 reanalysis, Copernicus Climate Change Service (C3S) / ECMWF (CC BY 4.0); ECMWF IFS and AIFS open data (CC BY 4.0); NOAA/NCEP GFS and GEFS.
The notices under the charts apply: all data have been modified for these plots.
If you use these plots in publications, posts, or presentations, please cite the source
and include a link to this page.